Our Diane comes in Black Cherry or any of the same colors as our Ashlee model.

“E” Bend Cut

Our lower horn is cut deeper than most double cut guitars on the market. We’ve cut the horn back below the 22nd fret. This allows you to bend a whole step on the high E String to that last “E”.

Standard Pickups: Frog Dog™
Optional: Seymour Duncan® Antiquities™, DiMarzio®, (noiseless)™ or Frog Dog '63™
Tuners: Grover™ - 18:1
Bridge: Wilkinson® Blade Tremolo

Specs:

Fretboard Radius: 12”
Width at Nut: 1.687”
Width at 12th Fret: 2.186”
1st Fret Thickness: .86”
10th fret thickness: .95”
Heel Depth: 1.620”
Body Thickness: 2.25”
Scale Length: 24.75” (24.562” actual)
Inlay: Side Dots Standard
Weight: Between 8 and 10 Pounds
Finish: Nitrocellulose Lacquer
Frets: We use Stew Mac #141 Medium / High fret wire. Width is .095", Crown is .045", Tang is .073”. Our slot is .023”. Of course all fret measurements are prior to radius and fret work on the fret board.

Spoke Truss Rod

The Diane has a spoke style truss rod to allow for easy adjustment (with almost any tool)

Belly Cut

Let’s face it - Leo got it right with this. All of our Diane models come with the belly cut. She hugs you just right!

A few things to know:

1. You can get standard single coil "Frog Dog" Standard pickups or…
2. You can order it custom with Frog Dog '63 set. These are single coils with an output of 6K on the neck and middle positions and 7K on the bridge position. This allows for a balanced output between pickups. Trust me - you will wonder how you lived without it!

The Diane is a bit different than your standard California favorite.

First of all, the neck scale is 24 3/4". You read that right! It's built on the same scale as our Ashlee! If you're the type that feels that extra half inch is just too long… YOU'RE NOT ALONE!! And we're here to help!

My first guitar was a 25 1/2" scale. I always felt like the neck tension and reach slowed me down a bit. Once the shorter scale and my fingers finally crossed paths, I knew that the 24 and 3/4" scale and I would get married.

We’ve also put a spoke truss rod wheel at the base of the neck. This allows for quick adjusting - even if you can’t find your hex wrench.

Our Diane comes in Black Cherry or any of the same colors as our Ashlee model.

“E” Bend Cut

Our lower horn is cut deeper than most double cut guitars on the market. We’ve cut the horn back below the 22nd fret. This allows you to bend a whole step on the high E String to that last “E”.

Standard Pickups: Frog Dog™
Optional: Seymour Duncan® Antiquities™, DiMarzio®, (noiseless)™ or Frog Dog '63™
Tuners: Grover™ - 18:1
Bridge: Wilkinson® Blade Tremolo

Specs:

Fretboard Radius: 12”
Width at Nut: 1.687”
Width at 12th Fret: 2.186”
1st Fret Thickness: .86”
10th fret thickness: .95”
Heel Depth: 1.620”
Body Thickness: 2.25”
Scale Length: 24.75” (24.562” actual)
Inlay: Side Dots Standard
Weight: Between 8 and 10 Pounds
Finish: Nitrocellulose Lacquer
Frets: We use Stew Mac #141 Medium / High fret wire. Width is .095", Crown is .045", Tang is .073”. Our slot is .023”. Of course all fret measurements are prior to radius and fret work on the fret board.

Spoke Truss Rod

The Diane has a spoke style truss rod to allow for easy adjustment (with almost any tool)

Belly Cut

Let’s face it - Leo got it right with this. All of our Diane models come with the belly cut. She hugs you just right!

A few things to know:

1. You can get standard single coil "Frog Dog" Standard pickups or…
2. You can order it custom with Frog Dog '63 set. These are single coils with an output of 6K on the neck and middle positions and 7K on the bridge position. This allows for a balanced output between pickups. Trust me - you will wonder how you lived without it!

The Diane is a bit different than your standard California favorite.

First of all, the neck scale is 24 3/4". You read that right! It's built on the same scale as our Ashlee! If you're the type that feels that extra half inch is just too long… YOU'RE NOT ALONE!! And we're here to help!

My first guitar was a 25 1/2" scale. I always felt like the neck tension and reach slowed me down a bit. Once the shorter scale and my fingers finally crossed paths, I knew that the 24 and 3/4" scale and I would get married.

We’ve also put a spoke truss rod wheel at the base of the neck. This allows for quick adjusting - even if you can’t find your hex wrench.

Map

Hours

Monday - Thursday  

Friday  

Saturday

 Sunday

2PM - 8 PM  

2PM - 6 PM  

11 AM - 3 PM  

 Closed

  • Facebook Social Icon
  • Twitter Social Icon
  • Google+ Social Icon
  • YouTube Social  Icon